PL
EN
1/2017 (168)
1/2017 (168)Lista artykułów
An innovative system for piston engine combustion with laser-induced ignition of the hydrocarbon fuel consisting carbon nanotubes
1/2017 (168) - CE-2017-101Autorzy: Jarosław KAŁUŻNY, Jerzy MERKISZ, Dawid GALLAS, Tomasz RUNKA, Miłosław KOZAK, Ireneusz PIELECHA
Słowa kluczowe: ethanol, carbon nanotubes, laser induced ignition
Marine diesel engine – a novel approach of indicated power determination and related uncertainty level
1/2017 (168) - CE-2017-102Autorzy: Przemysław KOWALAK, Stefan ŻMUDZKI, Tadeusz BORKOWSKI
Słowa kluczowe: marine diesel engine, indicated power, uncertainty
Tests of urban bus specific emissions in terms of currently applicable heavy vehicles operating emission regulations
1/2017 (168) - CE-2017-103Autorzy: Jerzy MERKISZ, Łukasz RYMANIAK
Słowa kluczowe: bus, drive system, hybrid, RDE, specific emissions
Analysis of the possibilities to achieve adiabatization process of combustion surrounded by inactive gases in Rapid Compression Machine
1/2017 (168) - CE-2017-104Autorzy: Wojciech CIEŚLIK, Ireneusz PIELECHA
Słowa kluczowe: exhaust gas recirculation, inactive gases, combustion fuels
Laboratory station for research of the innovative dry method of exhaust gas desulfurization for an engine powered with residual fuel
1/2017 (168) - CE-2017-105Autorzy: Zbigniew KORCZEWSKI, Jacek RUDNICKI, Ryszard ZADRĄG
Słowa kluczowe: compression-ignition engine, desulfurization of exhaust gas, dry method
Model of exhaust system of a traction diesel engine with pulse supercharging on transient modes
1/2017 (168) - CE-2017-106Autorzy: Marek BABEL, Evgeni KOSSOV
Słowa kluczowe: diesel engine, locomotive, mathematical model, pulse supercharging, exhaust system, transient process
Test bench measurement of friction loss in combustion engine
1/2017 (168) - CE-2017-107Autorzy: Emil WRÓBLEWSKI, Szymon FINKE
Słowa kluczowe: combustion engine, piston, oil, lubrication, friction loss
Multi-criteria fuel system optimization with an electronic control unit
1/2017 (168) - CE-2017-108Autorzy: Aleksander WRÓBLEWSKI
Słowa kluczowe: diesel engine, fuel system, solenoid injection, optimization
Diagnosing methods common rail fuel injectors
1/2017 (168) - CE-2017-109Autorzy: Tomasz OSIPOWICZ, Karol Franciszek ABRAMEK
Słowa kluczowe: CI engine, Common Rail system, fuel injector, high and low pressure system, engine diagnose, fuel combustion
Tyre rolling resistance and its influence on fuel consumption
1/2017 (168) - CE-2017-110Autorzy: Beata ŚWIECZKO-ŻUREK, Grzegorz RONOWSKI, Jerzy EJSMONT
Słowa kluczowe: tyres, measuring methods, rolling resistance, fuel consumption, CO2 emission
Multiresolution analysis of vibration signals acquired from locomotive Diesel engine for classification of engine states basing on signal statistical parameters
1/2017 (168) - CE-2017-111Autorzy: Piotr BOGUŚ, Mateusz CIESZYŃSKI, Jerzy MERKISZ
Słowa kluczowe: vibration signals, Diesel engine diagnostic, multiresolution analysis, classification
The effect of alternative fuels injection timing on toxic substances formation in CI engines
1/2017 (168) - CE-2017-112Autorzy: Marcin K. WOJS, Piotr ORLIŃSKI, Jakub LASOCKI
Słowa kluczowe: Biofuels, diesel engine, toxic substances
Cylinder-to-cylinder and cycle-to-cycle variation in combustion process in radial aircraft engine
1/2017 (168) - CE-2017-113Autorzy: Michał GĘCA
Słowa kluczowe: radial engine, combustion, non-uniformity, cycle-to-cycle variation, wavelet analysis, multifractal analysis
Effect of asymmetric elliptical shapes of the sealing ring sliding surface on the main parameters of the oil film
1/2017 (168) - CE-2017-114Autorzy: Piotr WRÓBLEWSKI
Słowa kluczowe: rings with asymmetrical sliding surface shape, friction loss, oil film, quantification of lubricant oil consumption
The evaluation of the regularity of the combustion process in the SI engine fueled with petrol and ethanol
1/2017 (168) - CE-2017-115Autorzy: Zdzisław STELMASIAK, Dariusz PIETRAS
Słowa kluczowe: ethyl alcohol, overall efficiency, engine smoothness, combustion pressure, indicated pressure
Studies on the dynamics the valve train with machined valve springs
1/2017 (168) - CE-2017-116Autorzy: Krystian SICZEK, Krzysztof SICZEK
Słowa kluczowe: dynamics, valve train, combustion engine, machined spring, finite element method
Causes of the powerplants failures installed on Polish civil aviation aircraft
1/2017 (168) - CE-2017-117Autorzy: Włodzimierz BALICKI, Paweł GŁOWACKI
Słowa kluczowe: powerplant, aircraft engine failure, safety risk
A 4-stroke spark-ignition engine fuelled with low quality gas
1/2017 (168) - CE-2017-118Autorzy: Marek BRZEŻAŃSKI, Michał MARECZEK, Marek SUTKOWSKI, Wojciech SMUGA
Słowa kluczowe: engine, genset, low quality gas
The proposition of utilisation the vehicle in 1:5 scale to construction and testing of an autonomous vehicle
1/2017 (168) - CE-2017-119Autorzy: Krzysztof PARCZEWSKI, Kazimierz M. ROMANISZYN
Słowa kluczowe: autonomous vehicle, determining the trajectory of the vehicle, the correction of the vehicle motion trajectory
Improving the environmental performance of the internal combustion engine by the use of in-cylinder catalyst
1/2017 (168) - CE-2017-120Autorzy: Monika ANDRYCH-ZALEWSKA
Słowa kluczowe: IC engine, catalyst, in-cylinder catalysis
The influence of vehicle body roll angle on the motion stability and maneuverability of the vehicle
1/2017 (168) - CE-2017-121Autorzy: Krzysztof PARCZEWSKI, Henryk WNĘK
Słowa kluczowe: stability of vehicle motion, suspensions, the interaction of the road and tires, the roll angle of vehicle body
Emission of pollution from motor vehicles with respect to selected solutions of roundabout intersections
1/2017 (168) - CE-2017-122Autorzy: Artur JAWORSKI, Kazimierz LEJDA, Maksymilian MĄDZIEL
Słowa kluczowe: emission, roundabout, traffic, urban transport, microsimulation
The creation of energy efficient hybrid vehicles in the Russian Federation
1/2017 (168) - CE-2017-123Autorzy: Kirill KARPUKHIN, Alexey TERENCHENKO
Słowa kluczowe: hybrid vehicle, range extender, traction battery, energy efficiency, climatic conditions
Environmental aspects of the impact of the technical condition of motor vehicles on environmental pollution
1/2017 (168) - CE-2017-124Autorzy: Marek IDZIOR, Edward CZAPLIŃSKI
Słowa kluczowe: exhaust, operation, research, cars, environment
The closed-cycle model numerical analysis of the impact of crank mechanism design on engine efficiency
1/2017 (168) - CE-2017-125Autorzy: Marcin OPALIŃSKI, Andrzej TEODORCZYK, Jakub KALKE
Słowa kluczowe: piston motion, engine, simulation, efficiency, opposed
Studying a construction of pistons for the aircraft CI engine
1/2017 (168) - CE-2017-126Autorzy: Ksenia SIADKOWSKA, Adam MAJCZAK, Grzegorz BARAŃSKI
Słowa kluczowe: aircraft engine, piston, CI engine, opposed-piston engine, designing pistons
Study on operating load of the compression ignition engine
1/2017 (168) - CE-2017-127Autorzy: Łukasz GRABOWSKI, Paweł KARPIŃSKI, Damian RUDZIK
Słowa kluczowe: compression ignition engine, load, operating condition
The analysis of temperature disintegration on the body of fuel injector during research on test bench
1/2017 (168) - CE-2017-128Autorzy: Tomasz OSIPOWICZ, Franciszek ABRAMEK
Słowa kluczowe: infrared camera, Common Rail system injector, injection and return dosages, fuel high pressure pump, CI engines
Hydroxyl radicals as an indicator of knocking combustion in the dual-fuel compression-ignition engine
1/2017 (168) - CE-2017-129Autorzy: Jakub LASOCKI, Piotr ORLIŃSKI, Marcin Krzysztof WOJS, Marlena OWCZUK, Anna MATUSZEWSKA
Słowa kluczowe: knocking combustion, dual-fuel engines, radicals, hydroxyl radicals
Multifaceted diagnostic inference process for identifying the causes of self-ignition engine faults resulting from PM sediments
1/2017 (168) - CE-2017-130Autorzy: Bogusław CIEŚLIKOWSKI, Mariusz CYGNAR, Janusz JAKÓBIEC
Słowa kluczowe: VGT turbocharger, PM particulates, diagnostic tester, spectral analysis, error codes
Optimizing the geometry of the connecting rod in opposite pistons engine
1/2017 (168) - CE-2017-131Autorzy: Paweł MAGRYTA, Konrad PIETRYKOWSKI, Adam MAJCZAK
Słowa kluczowe: connecting rod, simulation, FEM, Abaqus, Catia v5
Autorzy: Marta AMBROSEWICZ-WALACIK, Małgorzata TAŃSKA, Marek WALACIK, Michał KOZŁOWSKI
Słowa kluczowe: unconventional vegetable oils, quality, fatty acids composition, biofuels production