Current issue
Online first
Archive
About the Journal
Aims and scope
Publisher and Editorial
Advertising policy
For Authors
Paper review procedures
Procedures protecting authentic authorship of papers
Paper preparation manual
Plagiarism check
Publication ethics
Reviewers
APC
Editorial and Scientific Board
Contact
Reviewers
Assessment of the effectiveness of mounting the aircraft piston combustion engine on a test stand
1
Faculty of Civil and Transport Engineering, Poznan University of Technology, Poland
Submission date: 2023-12-11
Final revision date: 2024-04-02
Acceptance date: 2024-04-02
Online publication date: 2024-06-18
Publication date: 2024-08-09
Corresponding author
Marek Waligórski
Faculty of Civil and Transport Engineering, Poznan University of Technology, Poland
Faculty of Civil and Transport Engineering, Poznan University of Technology, Poland
Combustion Engines 2024,198(3), 82-92
KEYWORDS
empirical researchvibration isolationaircraft enginemounting efficiencyvibration accelerations-velocities-displacements
TOPICS
ABSTRACT
The subject of the considerations described in the paper is the problem of efficiency of mounting an aircraft engine on a dyno test bench. The paper presents the empirical research results of vibroacoustic signal application to the evaluation of correctness of positioning of the Rotax 912 piston aircraft engine. The variability of selected parameters and vibroacoustic characteristics for real engine operating conditions was assessed, and functional relations and their discrete representations were developed, reflecting the efficiency of mounting the object on the frame. Thanks to this process, quantitative measures of the diagnostic assessment of the object were obtained, which can be used in periodic or continuous operational control of the object, taking into account the impact of tribological processes taking place in the test object.
REFERENCES (37)
1.
Arroyo J, Muñoz M, Moreno F, Bernal N, Monné C. Diagnostic method based on the analysis of the vibration and acoustic emission energy for emergency diesel generators in nuclear plants. Appl Acoust. 2013;74(4):502-508. https://doi.org/10.1016/j. apacoust.2012.09.010.
2.
Avramchuk VS, Kazmin VP. Estimation of combustion engine rotation speed based on vibration signal analysis. KEM. 2016;685:436-440. https://doi.org/10.4028/www.sc....
3.
Berberova-Buhova N, Nedelchev L, Mateev G, Stoykova E, Strijkova V, Nazarova D. Influence of the size of Au nanoparticles on the photoinduced birefringence and diffraction efficiency of polarization holographic gratings in thin films of azopolymer nanocomposites. Opt Mater. 2021;121:111560. https://doi.org/10.1016/j.optm....
4.
Brzeziński K. Active-passive: on preconceptions of testing. Journal of Telecommunications and Information Technology. 2011;3:63-73. https://yadda.icm.edu.pl/bazte....
5.
Cempel C. Vibroacoustic machines diagnostics. Polish Scientific Publishing Houses. Warsaw 1989.
6.
Chen Y, Li F. Analysis of vibration and sound insulation characteristics of functionally graded sandwich plates. Compos Struct. 2020;249:112515. https://doi.org/10.1016/j.comp....
7.
Czechyra B, Szymański GM, Tomaszewski F. Assessment of cam valves clearance in internal combustion engine based on parameters of vibration – methodological assumption. Combustion Engines. 2004;118(1):51-59. https://doi.org/10.19206/CE-11....
8.
Delvecchio S, Bonfiglio P, Pompoli F. Vibro-acoustic condition monitoring of internal combustion engines: a critical review of existing techniques. Mech Syst Signal Pr. 2018;99:661-683. https://doi.org/10.1016/j.ymss....
9.
Fiebig W, Wróbel J. Two stage vibration isolation of vibratory shake-out conveyor. Arch Civ Mech Eng. 2017;17(2):199-204. https://doi.org/10.1016/j.acme....
10.
He D, Ou D, Gao H, Jiao F. Thermal insulation and anti-vibration properties of MoSi2-based coating on mullite fiber insulation tiles. Ceram Int. 2022;48(2):1844-1850. https://doi.org/10.1016/j.cera....
14.
Idaszewska N, Szymański GM. Identification of characteristic vibration signal parameters during transport of fruit and vegetable. Vibrations in Physical Systems. 2020;31(1):2020111-1-2020111-10. https://vibsys.put.poznan.pl/?....
15.
Jałowiecki A, Fidali M, Krol A. Investigation of rolling bearing lubrication condition. Diagnostyka. 2021;22(4):51-58. https://doi.org/10.29354/diag/....
16.
Korbicz J, Kościelny J. Modeling, diagnostics, and mastering processes. DiaSter implementation. Scientific and Technical Publishing House. Warsaw 2010.
17.
Korbicz J, Kościelny JM, Kowalczuk Z, Cholewa W. Process diagnostics. Science and Technology Publishing House. Warsaw 2002.
18.
Kozak M, Lijewski P, Fuć P. Exhaust emissions from a city bus fuelled by oxygenated diesel fuel. SAE Technical Paper 2020-01-2095. 2020. https://doi.org/10.4271/2020-0....
19.
Kozak M, Lijewski P, Waligórski M. Exhaust emissions from a hybrid city bus fuelled by conventional and oxygenated fuel. Energies. 2022;15(3):1123. https://doi.org/10.3390/en1503....
20.
Lijewski P, Kozak M, Fuć P, Rymaniak Ł, Ziółkowski A. Exhaust emissions generated under actual operating conditions from a hybrid vehicle and an electric one fitted with a range extender. Transport Res D-Tr E. 2020;78:102183. https://doi.org/10.1016/j.trd.....
21.
Ma N, Han Q, Han S, Li Ch. Hierarchical re-entrant honeycomb metamaterial for energy absorption and vibration insulation. Int J Mech Sci. 2023;250:108307. https://doi.org/10.1016/j.ijme....
22.
Nowakowski T, Komorski P. Diagnostics of the drive shaft bearing based on vibrations in the high-frequency range as a part of the vehicle’s self-diagnostic system. Eksploat Niezawodn. 2021;24(1):70-79. https://doi.org/10.17531/ein.2....
23.
Orczyk M, Tomaszewski F. Method of reduction of diagnostic parameters during observation on the example of a combustion engine. MATEC Web of Conferences. 2017;118:00034-1-00034-7. https://doi.org/10.1051/matecc....
24.
Peeters C, Leclerc Q, Antoni J, Guillaume P, Helsen J. Vibration-based angular speed estimation for multi-stage wind turbine gearboxes. J Phys Conf Ser. 2017;842:012053. https://doi.org/10.1088/1742-6....
25.
Roozen NB, Urbán D, Piana EA, Glorieux C. On the use of dynamic vibration absorbers to counteract the loss of sound insulation due to mass-spring-mass resonance effects in external thermal insulation composite systems. Appl Acoust. 2021;178:107999. https://doi.org/10.1016/j.apac....
26.
Sujatha C. Vibration, acoustics and strain measurement, theory and experiments. Springer 2023. https://doi.org/10.1007/978-3-....
27.
Szymański GM, Tabaszewski M. Engine valve clearance diagnostics based on vibration signals and machine learning methods. Eksploat Niezawodn. 2020;22(2):331-339. https://doi.org/10.17531/ein.2....
28.
Szymański GM, Tomaszewski F. Diagnostics of automatic compensators of valve clearance in combustion engine with the use of vibration signal. Mech Syst Signal Pr. 2016;68-69:479-490. https://doi.org/10.1016/j.ymss....
29.
Waligórski M, Batura K, Kucal K, Merkisz J. Empirical assessment of thermodynamic processes of a turbojet engine in the process values field using vibration parameters. Measurement. 2020;158:107702. https://doi.org/10.1016/j.meas....
30.
Waligórski M, Batura K, Kucal K, Merkisz J. Research on airplanes engines dynamic processes with modern acoustic methods for fast and accurate diagnostics and safety improvement. Measurement. 2020;154:107460. https://doi.org/10.1016/j.meas....
31.
Yang X-H, Kang Y, Xie X, Zhang Q, Shangguan W-B. Multilayer coupled plate-type acoustic metamaterials for low-frequency broadband sound insulation. Appl Acoust. 2023;209;109399. https://doi.org/10.1016/j.apac....
32.
Zhang L, Bai Z, Chen Y. Dual-functional hierarchical mechanical metamaterial for vibration insulation and energy absorption. Eng Struct. 2022;271;114916. https://doi.org/10.1016/j.engs....
33.
Zhang P, Gao W, Li Y, Wei Z. Combustion parameter evaluation of diesel engine via vibration acceleration signal. Int J Engine Res. 2021;23(10):1760-1781. https://doi.org/10.1177/146808....
34.
Zhu Z, Wang G, Sheng Z, Zhang Y, Xu R. Sound insulation properties of embedded co-cured composite damping sandwich panel under arbitrary boundary conditions. Mech Syst Signal Pr. 2023;204:110810. https://doi.org/10.1016/j.ymss....
35.
Zimroz R, Urbanek J, Barszcz T, Bartelmus W, Millioz F, Martin N. Measurement of instantaneous shaft speed by advanced vibration signal processing – application to wind turbine gearbox. Metrol Meas Syst. 2011;4:701-712. https://doi.org/10.2478/v10178....
36.
Zacharewicz M, Socik P, Wirkowski P, Zadrąg R, Bogdanowicz A. Evaluation of the impact of supplying a marine diesel engine with a mixture of diesel oil and n-butanol on its efficiency and emission of toxic compounds. Combustion Engines. 2023;195(4):40-47. https://doi.org/10.19206/CE-16....
37.
Żurawski PK. Optimization of the combustion chamber strength of aluminum pistons in diesel engines using the DuralBowl technology. Combustion Engines. 2023;192(1):91-96. https://doi.org/10.19206/CE-15....
Share
RELATED ARTICLE
| eISSN: | 2658-1442 |
| ISSN: | 2300-9896 |
The scientific journal is financed under the Agreement 185/WCN/2019/1 from the funds of the Minister of Science and Higher Education
© 2006-2024 Journal hosting platform by Bentus
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
